Lo-Chlor Hot Tub System Flush
In stock
16,20€
incl. 20% VAT
Hot Tub System Flush, or "Nettoyant Spa", is a concentrated cleaner for internal pipe-work in hot tubs and spas prior to draining down. It removes calcium scale, body fats and other unwanted harboured waste from the internal system.
How to use it
- Remove filter cartridge from filter compartment.
- Ensure water level is at least 50 mm above the jets.
- Turn the hot tub/spa to run and empty the required dose into the filter compartment (see table below).
- Run your hot tub/spa for a minimum of 30 minutes.
- Turn off the hot tub/spa for 30 minutes.
- Run the hot tub/spa for a further 30 minutes.
- Drain the hot tub/spa and using a garden hose wash away any debris from around the shell and jets.
- Refill with fresh water.
- Sanitise the spa/hot tub with your chosen disinfectant prior to re-using.
Hot Tub System Flush is not a biocide.
Dosage
1 bottle of 250 ml for a spa up to 1300 litres
2 bottles of 250 ml for a 1300 to 2600 litres spa
For normal use, treatment should be carried out at least every 12 weeks prior to drain down as this will assist in the removal of waste build up. For heavy use, treatment should be carried out on a 6-week basis.
Countries delivered
We supply Lo-Chlor Hot Tub System Flush throughout the European Union with the exception of Finland, Belgium, Luxembourg and the Netherlands.
Volume
250 ml
Documentation
