HydroAir Genesis 500W blower with pneumatic control

The Genesis G50-2ANT-S from HydroAir is a pneumatic 3-speed blower with variable massage mode and automatic dry-out of air system. To be used with one standard pneumatic button.

It is suitable for most portable spas. It is pre-equipped with a pneumatic switch and pneumatic hose, and to which you can connect a air button.

To prevent water from flooding the blower, the air pipe between the blower and the spa must include a loop that passes over the water level, and one or two check valves. If water has entered your old blower, be sure to check the check valve and replace it if necessary. The most suitable valve for this blower would normally be a 1" air check valve.

Dimensions
Length: 275 mm
Width: 150 mm
Height: 190 mm

Connection
The blower comes with a union for 32 mm pipe. You can also choose a 1-inch pipe union.

Cable and plug
The blower is supplied pre-cabled without plug. You can also choose to have it pre-cabled with an AMP plug or a mini J&J plug by our team.

An in.link plug is also available, but we recommend that you keep your existing cable if it's in good condition. Your blower may indeed be defective for many reasons, but the power cable is rarely to blame.

Warranty
2-year Tubs Parts warranty

Note that the 2-year warranty does not apply to the carbon brush, also known as a motor brush, a graphite bonding agent that conducts the electrical current between stationary and rotating wires inside the motor. The carbon brush is a wearing part with a life expectancy of approximately 1500 hours.

Part numbers
HydroAir: G50-2ANT-S